• Store user defined architectural settings for walls & openings
• Create a cavity wall from inside or outside face
• Create internal walls
• Tee walls into each other and clean up crossing walls
• Create brick or block return openings in a cavity wall
• Make an opening in a cavity wall with a user defined thermal break
• Make an opening in a single wall
• Create a door, double door or window in an opening
• Draw a sill across a wall opening
• Draw simple stairs in plan or in section
• Stud or joist generator
• Draw wall sections showing bricks & blocks with insulation layer and renders
  

ProDraw

• Draw lines simply by 'point and draw' or by angle and distance
• Multiple single or chained line offsets
• Repeat fillet and chamfer to set sizes
• Generate a line of user defined boxes
• Generate a user defined solid grid
• Draw arrows with balloons at the ends
• Draw a line starting midway between two points
• Draw user defined parallel frames
• Draw equally spaced vertical or horizontal bars

ProEdit

• Divide a line into equal or measured sections
• Make a linear array of copies
• Apply circle centrelines
• Repeat rotate of entity by fixed angle
• Hatch between two entities
• Quick move, quick stretch
  

ProText

• Measure distance and place it as text
• Chained distance along lines and arcs
• Measure an area and place it as text
• Write coordinate position as X,Y text
• Quickly set text line spacing to suit tables
• Enter text and repeatedly insert it
• Generate a series of incrementing numbers
• Draw a series of numbers with any prefix
  
  Parts Libraries

  UK based libraries of commonly used components in both pull down and on screen formats.
  
  Architectural, Doors & Windows, Bathroom, Electrical, Space Planning, Trees, cars & people, Mechanical, Electrical, Plant & Pipe, Process, Structural
  
  and many others.